It is currently Sun May 11, 2025 6:08 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
Offline
 Post subject: Go problem: linking up stones
Post #1 Posted: Wed Jan 07, 2015 10:20 am 
Beginner

Posts: 9
Liked others: 1
Was liked: 1
Rank: Beginner
Universal go server handle: UbarbedAl
Hello,

I'm reading Graded Go Problems for beginners, Volume 2 and encountered a problem for whichs I don't understand the proposed answer.

The author says in his introduction to try and refute the correct answer until you find you can't refute it and thus accept the correct answer. I've been trying to do just that but I always seem to be able to refute his answer. As I'm not good at Go, I suppose there's something that I don't understand.

The question in the book is: What should black do to link the stones at the top with the stones at the bottom. The correct answer from the book is in the sgf below. The comment with the answer says that there is no way that qhite can prevent black from connecting:


If I continue to try and link the top black stones with the lower black stones I always seem to find a way to block with White, at least in the first couple of moves.
After that it depends on which variant White uses:
- I can then take White's blocking stones and connect the black groups or,
- I can't take White, he escapes and I can't connect the black groups.
When I can link the black stones this is after about 20 steps, but that seems a lot to me considering the other solutions in the book. Usually there is a firm answer within just a couple of moves.

Maybe I shouldn't understand 'link' as a true physical link but rather the potential link? Or might there be a more elegant solution, meaning can you always link/connect the two black groups as stated in the answer?

Thanks a lot!

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #2 Posted: Wed Jan 07, 2015 10:52 am 
Oza

Posts: 2495
Location: DC
Liked others: 157
Was liked: 443
Universal go server handle: skydyr
Online playing schedule: When my wife is out.
I don't see the SGF, and when I try to view it directly, it says that the attachment no longer exists. Could you repost it?

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #3 Posted: Wed Jan 07, 2015 11:52 am 
Beginner

Posts: 9
Liked others: 1
Was liked: 1
Rank: Beginner
Universal go server handle: UbarbedAl

Attachment:
problem74.sgf [288 Bytes]
Downloaded 756 times

Hopefully it is there now, in the preview it seems okay.

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #4 Posted: Wed Jan 07, 2015 12:19 pm 
Judan

Posts: 6727
Location: Cambridge, UK
Liked others: 436
Was liked: 3720
Rank: UK 4 dan
KGS: Uberdude 4d
OGS: Uberdude 7d
Where did you manage to create a twenty move sequence?

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #5 Posted: Wed Jan 07, 2015 12:34 pm 
Lives in gote

Posts: 420
Liked others: 75
Was liked: 58
Rank: EGF 4k
I don't see a problem. When e.g. white plays B14 black simply answers B13. If white then connects via C14, black connects at A14. On the top side its even more simple.

Click Here To Show Diagram Code
[go]$$Wcm1
$$ -----------
$$ |..........
$$ |.8........
$$ |.76X.O....
$$ |.X5X......
$$ |.XOO.O....
$$ |413O.O....
$$ |.2XXX.....
$$ |..........
$$ |..........
$$ |..........[/go]


If white doesn't connect via C14 its also simple:

Click Here To Show Diagram Code
[go]$$Wcm1
$$ -----------
$$ |..........
$$ |..........
$$ |...X.O....
$$ |.X.X......
$$ |.XOO.O....
$$ |314O.O....
$$ |.2XXX.....
$$ |..........
$$ |..........
$$ |..........[/go]


Could you post a variation where you think white can escape and block the connection?

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #6 Posted: Wed Jan 07, 2015 12:55 pm 
Dies with sente

Posts: 85
Liked others: 2
Was liked: 14
schawipp wrote:
When e.g. white plays B14 black simply answers B13.

I think Black can resist even more strongly, by playing at C14.
Click Here To Show Diagram Code
[go]$$Wcm1
$$ -----------
$$ |..........
$$ |.8........
$$ |.76X.O....
$$ |.X5X......
$$ |.XOO.O....
$$ |.12O.O....
$$ |.3XXX.....
$$ |.4........
$$ |..........
$$ |..........[/go]

The White stones ( :w1: and :w3:) cannot escape.

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #7 Posted: Wed Jan 07, 2015 4:44 pm 
Beginner

Posts: 9
Liked others: 1
Was liked: 1
Rank: Beginner
Universal go server handle: UbarbedAl
Thank you for your answers.
My '20-move' solution is because I want Black to physically connect and also White is maybe a little exagerating trying to stop Black from doing just that. Maybe White wouldn't do this in 'real' life?
In my solution for White to escape, Black made a mistake.
So I suppose these are part of my problem, how good are White and Black in these problems? Do they make mistakes? This kind of thinking could lead to absurd situations, like Black or White playing somewhere completely irrelevant (for the tsumego that has to be solved) and we don't want that, but how far should I go?

So my total connection solutions are below with around 20 moves to get total connection if White is 'throwing bad stones after good ones' . Also in the first one White escapes in the variation.


Attachment:



Attachment:
problem74_solution-White-B14_Black-B13.sgf [297 Bytes]
Downloaded 787 times



Attachment:
problem74_solution-Wb14-b13_Bc14-c12.sgf [384 Bytes]
Downloaded 755 times


If I make White smarter and still try to make a total connection, the number of moves is only 12.

Any suggestions?

Thanks in advance!

Top
 Profile  
 
Offline
 Post subject:
Post #8 Posted: Wed Jan 07, 2015 4:49 pm 
Honinbo
User avatar

Posts: 8859
Location: Santa Barbara, CA
Liked others: 349
Was liked: 2076
GD Posts: 312
alisbarbe wrote:
how good are White and Black in these problems? Do they make mistakes?
Hi alisbarbe, good question. We try to find the absolute best moves for both sides.

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #9 Posted: Wed Jan 07, 2015 5:48 pm 
Judan

Posts: 6727
Location: Cambridge, UK
Liked others: 436
Was liked: 3720
Rank: UK 4 dan
KGS: Uberdude 4d
OGS: Uberdude 7d
alisbarbe wrote:
My '20-move' solution is because I want Black to physically connect and also White is maybe a little exagerating trying to stop Black from doing just that. Maybe White wouldn't do this in 'real' life?
In my solution for White to escape, Black made a mistake.


In go when we talk about connection like this we don't usually mean connecting to form a single chain of stones that all share the same liberties, but to connect stones such that, with alternating play you can, by playing good moves, always maintain that connection even if your opponent tries to cut you. If you choose to play bad moves obviously you won't do as well as you could.

It seems to me you need to practice capturing a stone in atari on the 2nd line. If you are confident in that, and how things can change as liberties of the surrounding stones are reduced, then you will see you can answer b14 at c14 and white's stone is simply dead. Take a look at these problems: viewtopic.php?p=172664#p172664.


This post by Uberdude was liked by: Bill Spight
Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #10 Posted: Wed Jan 07, 2015 6:46 pm 
Honinbo

Posts: 10905
Liked others: 3651
Was liked: 3374
alisbarbe wrote:
Thank you for your answers.
My '20-move' solution is because I want Black to physically connect and also White is maybe a little exagerating trying to stop Black from doing just that. Maybe White wouldn't do this in 'real' life?
In my solution for White to escape, Black made a mistake.
So I suppose these are part of my problem, how good are White and Black in these problems? Do they make mistakes? This kind of thinking could lead to absurd situations, like Black or White playing somewhere completely irrelevant (for the tsumego that has to be solved) and we don't want that, but how far should I go?


The player to play and succeed (the first player) has to play perfectly. The other player (the second player) can play anything, and the first player has to be able to succeed, no matter what the second player plays. Since the first player has to be able to succeed against perfect play, we can consider both players to be perfect, as Ed Lee says. :)

In most situations we do not explore all the possible plays for the second player, trusting that the first player can succeed unless the second player makes certain plays. Sometimes that assumption is wrong. :-|

This particular problem is one that I learned when I was around 3 kyu. I do not think of it as a beginner problem. For one thing, the possible number of plays for the second player is quite large. It takes some experience, I think, to be able to prune the possibilities. I have looked at a few of your variations, and I salute your thoroughness. :salute: Take nothing for granted. But I think that this problem was probably too hard for you right now.

_________________
The Adkins Principle:
At some point, doesn't thinking have to go on?
— Winona Adkins

Visualize whirled peas.

Everything with love. Stay safe.


This post by Bill Spight was liked by: alisbarbe
Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #11 Posted: Thu Jan 08, 2015 3:25 am 
Judan

Posts: 6727
Location: Cambridge, UK
Liked others: 436
Was liked: 3720
Rank: UK 4 dan
KGS: Uberdude 4d
OGS: Uberdude 7d
schawipp wrote:
I don't see a problem. When e.g. white plays B14 black simply answers B13. If white then connects via C14, black connects at A14. On the top side its even more simple.

Click Here To Show Diagram Code
[go]$$Wcm1
$$ -----------
$$ |..........
$$ |.8........
$$ |.76X.O....
$$ |.X5X......
$$ |.XOO.O....
$$ |413O.O....
$$ |.2XXX.....
$$ |..........
$$ |..........
$$ |..........[/go]



schawipp, seems you need to practice capturing stones on the second line too :) You should cut at c14, your falling back to b13 has this problem:

Click Here To Show Diagram Code
[go]$$Wcm1
$$ -----------
$$ |..........
$$ |.6........
$$ |854X.O....
$$ |.X3X......
$$ |7XOO.O....
$$ |.19O.O....
$$ |.2XXX.....
$$ |..........
$$ |..........
$$ |..........[/go]


Now black could actually play 6 at 9, and then white 6 doesn't quite work, but with a little more support on the top side around e18 it could. Cutting at c14 just works.


This post by Uberdude was liked by: schawipp
Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #12 Posted: Thu Jan 08, 2015 2:56 pm 
Lives in gote

Posts: 420
Liked others: 75
Was liked: 58
Rank: EGF 4k
Uberdude wrote:
schawipp, seems you need to practice capturing stones on the second line too :) You should cut at c14, your falling back to b13 has this problem:


Yes, you hit the point. As a former chessplayer I initially was too much focused on killing/rescuing even single stones. Lately I am sometimes too relaxed on such stones and then end up losing games by 1.5 points ;-)

Top
 Profile  
 
Offline
 Post subject: Re: Go problem: linking up stones
Post #13 Posted: Thu Jan 08, 2015 3:31 pm 
Beginner

Posts: 9
Liked others: 1
Was liked: 1
Rank: Beginner
Universal go server handle: UbarbedAl
Thanks for all your help.

I will remember to try and play Black and White as good as possible & not always play till the end (stones that are clearly dead, groups that are alive).

@Bill, thanks for your compliments but I must say that my thoroughness was spiked by others in this thread who asked me to elaborate my questions & who also gave me a base to work on (Uberdude, shawipp, amatterof) ;-)

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group