It is currently Thu Mar 28, 2024 5:56 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
Offline
 Post subject: GoAutomation
Post #1 Posted: Sun Jul 19, 2020 7:52 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
https://github.com/zhmgczh/GoAutomation
http://www.caiyiwen.tech/article/GoAutomation.html
program for playing two programs without gtp

I understood what ctrl + w, ctrl + b, ctrl + s, but after one move it stops. Can someone figure it out?

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #2 Posted: Mon Jul 20, 2020 3:19 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
I managed to run this program! last time it didn’t work, perhaps because I wanted two MultiGo to play. Leela and MultiGo (gnugo) play without problems!
what is needed for that?
1 run GoAutomation
2 start, for example, Leela and MultiGo
3 place the mouse pointer in the center of the black board and press ctrl + b
4 place the mouse pointer in the center of the white board and press ctrl + w
5 let Black make a move, put the mouse cursor on the stone and press Ctrl + s
6 if I understood correctly, ctrl + t is a stop, then you can continue, put the mouse cursor on the last stone and press ctrl + s

This program works with Leela, unlike gtool2


Attachments:
GoAutomation.jpg
GoAutomation.jpg [ 362.41 KiB | Viewed 9463 times ]
Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #3 Posted: Fri Jul 24, 2020 2:45 am 
Dies in gote

Posts: 54
Liked others: 60
Was liked: 10
GTool2 (Tool for auto-playing between two igo softs)


Attachments:
manual.mkv.gz [1.4 MiB]
Downloaded 525 times
GTool2.exe.gz [71.51 KiB]
Downloaded 531 times
Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #4 Posted: Sun Oct 11, 2020 4:16 pm 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
I found a way how to make GoAutomation work with programs that it doesn't work with. checked on several programs. GoAutomation is faster and more stable than GTool2. if anyone is interested, I will write in more detail

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #5 Posted: Sun Oct 11, 2020 10:07 pm 
Gosei
User avatar

Posts: 1581
Location: Hong Kong
Liked others: 54
Was liked: 544
GD Posts: 1292
Please do share.

_________________
http://tchan001.wordpress.com
A blog on Asian go books, go sightings, and interesting tidbits
Go is such a beautiful game.

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #6 Posted: Mon Oct 12, 2020 10:29 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
probably it's the color or texture of the board. Sabaki - I changed the theme to "photorealistic" and the GoAutomation started working! in Crazy Stone Zero the image of the board contains 2 layers, I replaced the layer with the image of the board with a screenshot from the Sabaki (consider the size, and there should be 2 layers, otherwise possibly it will be buggy) and it worked too! also I made some more programs

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #7 Posted: Sat Oct 17, 2020 2:11 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
Is there an instruction in Chinese or English? or a screenshot of the program window with hieroglyphs? to translate. I have question marks instead

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #8 Posted: Sat Oct 17, 2020 6:05 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
hieroglyphs appeared in the Chinese locale! translation:

Ou ushered in Cha Benwen's surrounding adapter
Please do not minimize this dialog box, you can place it after the air dialog box.
Please close all surplus virus software and unnecessary programs, otherwise the adapter may malfunction.
To the dialog box, try to avoid the pop-up window.
Ctrl + b - Put the most mark on the black chessboard grid (recommend Tianyuan and Xing, can be placed in the black part of the beginning)
Ctrl + w - Place the mouse icon on your own disk network (Tianyuan and Xing are recommended)
Ctrl + alt + b - The first time the mouse mark is placed at the intersection of the upper left corner of the black board, the second time is the lower right corner
Ctrl + alt + w - The first time the scale is placed at the intersection of the upper left corner of the disk, the second time is the lower right corner
Ctrl + s - put the most mark on the initial chess piece on the black board to start the conversion
Ctrl + t - Pause the conversion (when pressing it is best that the black chess is finished but the white chess is not moved)
Ctrl + e - end conversion
Ctrl + alt + l - read the configuration file under the root directory
Ctrl + alt + s - write the current configuration into the directory
Ctrl + alt + e - exchange black and white board
Ctrl + alt + g - Get the current status from the white chess board
Files generated under the root directory:
chessboard.txt - current chessboard status
Entries.txt - Current game record

(google translate)

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #9 Posted: Sat Feb 06, 2021 8:46 am 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
found another program https://github.com/nanhuayu/PytoGo

pytogo is a software that integrates recognition of chess records and simple movement of chess pieces. It has the advantages of high accuracy of chess record recognition and convenient and quick use.
pytogo uses a more powerful and accurate intelligent image recognition connection engine to perfectly recognize almost all screenshots of the Go board. Perfectly applicable to almost all game software, even the web version of the Go board.
pytogo is more convenient and easy to use, supports not occupying the mouse, and can play chess while working.
pytogo is free software, you can get a free license by contacting the author or joining the QQ exchange group.

(google translate)

Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #10 Posted: Mon May 23, 2022 12:28 pm 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
another great program! even if the windows of the two go programs partially overlap each other!
http://shogidokoro.starfree.jp/autogo/index.html


This post by And was liked by: Dragon
Top
 Profile  
 
Offline
 Post subject: Re: GoAutomation
Post #11 Posted: Sun Feb 19, 2023 10:46 pm 
Gosei
User avatar

Posts: 1348
Liked others: 202
Was liked: 203
AutoGo 1.2.2
http://shogidokoro.starfree.jp/autogo/index.html


This post by And was liked by: Dragon
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group