slotted boards

General discussions about gobans, etc., go here. If you're selling go equipment, it should go in the Trading Post.
Post Reply
User avatar
kex
Dies with sente
Posts: 105
Joined: Wed Apr 21, 2010 11:07 am
GD Posts: 731
Location: Espoo, Finland
Has thanked: 1 time
Been thanked: 21 times

slotted boards

Post by kex »

hi,

I have a feeling I have seen an approx 1 sun slotted board somewhere. I tried to look for one in the online stores, but all I could find were the thin (perhaps about 1cm) boards. Any information, anyone?
bogiesan
Lives in gote
Posts: 533
Joined: Thu Mar 24, 2011 11:00 am
Rank: 13k
GD Posts: 0
Has thanked: 1 time
Been thanked: 136 times

Re: slotted boards

Post by bogiesan »

SLotted boards are limited in thickness by the assumption they are portable. My 1" is about as much mass as I wish to carry. If I wanted to impress or intimidate or just brag, I'd bring a table board to the club. My table board is made of dense purpleheart (bragging here) and it masses like 20-30 pounds.
I have no idea what a sun is.
David Bogie, Boise ID
I play go, I ride a recumbent, of course I use Macintosh.
User avatar
tchan001
Gosei
Posts: 1582
Joined: Wed Apr 21, 2010 6:44 pm
GD Posts: 1292
Location: Hong Kong
Has thanked: 54 times
Been thanked: 534 times
Contact:

Re: slotted boards

Post by tchan001 »

http://tchan001.wordpress.com
A blog on Asian go books, go sightings, and interesting tidbits
Go is such a beautiful game.
gowan
Gosei
Posts: 1628
Joined: Thu Apr 29, 2010 4:40 am
Rank: senior player
GD Posts: 1000
Has thanked: 546 times
Been thanked: 450 times

Re: slotted boards

Post by gowan »

Kiseido used to sell these but their current online inventory doesn't list them. But they might be able to get one for you. They are still available, as shown on this Japanese page for the Nihon Ki-in online shop: http://item.rakuten.co.jp/nihonkiin/005b/ This board has a 19x19 grid on one side and 13x13 on the other. The price is a bit more than $80.00USD, not including shipping. The board is made of agathis wood.
bogiesan
Lives in gote
Posts: 533
Joined: Thu Mar 24, 2011 11:00 am
Rank: 13k
GD Posts: 0
Has thanked: 1 time
Been thanked: 136 times

Re: slotted boards

Post by bogiesan »

gowan wrote:Kiseido used to sell these but their current online inventory doesn't list them. But they might be able to get one for you. They are still available, as shown on this Japanese page for the Nihon Ki-in online shop: http://item.rakuten.co.jp/nihonkiin/005b/ This board has a 19x19 grid on one side and 13x13 on the other. The price is a bit more than $80.00USD, not including shipping. The board is made of agathis wood.


So a sun is one inch? Sheesh. Now define a cubit.

An $80 dual-grid, slotted board of agathis is a good bargain. Buy it.
David Bogie, Boise ID
I play go, I ride a recumbent, of course I use Macintosh.
imabuddha
Lives with ko
Posts: 255
Joined: Tue Apr 20, 2010 12:40 pm
GD Posts: 0
Location: Miyazaki, Japan
Has thanked: 354 times
Been thanked: 66 times

Re: slotted boards

Post by imabuddha »

bogiesan wrote: Now define a cubit.


Depends on who's Pharaoh at the time. :grumpy:
bogiesan
Lives in gote
Posts: 533
Joined: Thu Mar 24, 2011 11:00 am
Rank: 13k
GD Posts: 0
Has thanked: 1 time
Been thanked: 136 times

Re: slotted boards

Post by bogiesan »

imabuddha wrote:
bogiesan wrote: Now define a cubit.

Depends on who's Pharaoh at the time. :grumpy:


And which part of said pharaoh we was measurin'.
David Bogie, Boise ID
I play go, I ride a recumbent, of course I use Macintosh.
imabuddha
Lives with ko
Posts: 255
Joined: Tue Apr 20, 2010 12:40 pm
GD Posts: 0
Location: Miyazaki, Japan
Has thanked: 354 times
Been thanked: 66 times

Re: slotted boards

Post by imabuddha »

bogiesan wrote:And which part of said pharaoh we was measurin'.


The forearm I believe. :)
User avatar
kex
Dies with sente
Posts: 105
Joined: Wed Apr 21, 2010 11:07 am
GD Posts: 731
Location: Espoo, Finland
Has thanked: 1 time
Been thanked: 21 times

Re: slotted boards

Post by kex »

Thanks for replies.

Interesting comments about units of length. I don't get the fuzz, the inch is also a non-SI unit.
gowan
Gosei
Posts: 1628
Joined: Thu Apr 29, 2010 4:40 am
Rank: senior player
GD Posts: 1000
Has thanked: 546 times
Been thanked: 450 times

Re: slotted boards

Post by gowan »

A sun is part of the old pre-metric Japanese system of measurement known as shaku-ho. See this Wikipedia page for more info: http://en.wikipedia.org/wiki/Japanese_u ... easurement There you will see that a sun is about 30.3 mm or 1.19 inches. So it's a little more than one inche but for a rough estimate 1 sun = 1+ inch is a reasonable rule of thumb, especially if the barley has large grains :)
Last edited by gowan on Fri Apr 27, 2012 1:26 pm, edited 1 time in total.
imabuddha
Lives with ko
Posts: 255
Joined: Tue Apr 20, 2010 12:40 pm
GD Posts: 0
Location: Miyazaki, Japan
Has thanked: 354 times
Been thanked: 66 times

Re: slotted boards

Post by imabuddha »

gowan wrote:There you will see that a sun is about 30.3 cm or 1.19 inches.

Methinks you put decimal in the wrong place… :shock:
gowan
Gosei
Posts: 1628
Joined: Thu Apr 29, 2010 4:40 am
Rank: senior player
GD Posts: 1000
Has thanked: 546 times
Been thanked: 450 times

Re: slotted boards

Post by gowan »

imabuddha wrote:
gowan wrote:There you will see that a sun is about 30.3 cm or 1.19 inches.

Methinks you put decimal in the wrong place… :shock:

Oops! Fixed it. Should be mm, not cm :oops:
bakekoq
Dies with sente
Posts: 122
Joined: Fri May 25, 2012 10:22 pm
Rank: KGS 12kyu
GD Posts: 0
KGS: hojoin
OGS: sojiro
bakekoq
Online playing schedule: wah,almost everyday in OGS right now.I still can't play in KGS because the limitness of my network.

Re: slotted boards

Post by bakekoq »

owh.. slotted boards is the board than can divide into two parts with same length?
btw,I'm thinking about making a board that's thin as thin just like a foldable chess. what do you think?
Post Reply